Moeller Electric

M22-DR-Y

Moeller M22-DR-Y 22MM maintained (push to test) push button with yellow lens and silver bezel. This non-illuminated Moeller pilot device comes with a screw locking ring and a M22-A mounting adapter...

M22-DRH-S

Moeller M22-DRH-S 22MM maintained (push to test) push button with extended black lens and silver bezel. This non-illuminated Moeller pilot device comes with a screw locking ring and a M22-A mounting...

DILA-22 (120V AC)

Eaton/Moeller DILA-22 (110v50Hz/120v60Hz) 4-pole control relay with 2 normally open (N.O.) and 2 normally closed (N.C.) power poles and a 120 volt AC coil. This 10 AMP control relay has screw...

DILM32-01 (120vAC)

Eaton/Moeller DILM32-01 contactor with a 120 volt AC rated coil, 1 normally closed base mounted auxiliary contact and is rated for 32 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is...

ZM-25-PKZ2

Moeller ZM-25-PKZ2 thermal trip module that is adjustable from 16 to 25 AMPS and is used for installation into the PKZ2 base module. This trip block comes standard with Class 10 tripping so that it...

M22-D-B

Moeller M22-D-B blue momentary pushbutton with silver bezel and used in 22MM sized applications. This non-illuminated Moeller pushbutton is used with M22 contact blocks and a M22-A fixing adapter for...

DILM95-XSP (24vAC)

Moeller Electric/Klockner Moeller DILM95-XSP 24 volt AC replacement coil for DILM80 and DILM95 contactors. Moeller’s DILM contactor series includes a completely NEW offering in the lower 7 to...

DILM17-01 (120V AC)

Eaton/Moeller DILM17-01 contactor with a 120 volt AC rated coil, 1 normally closed base mounted auxiliary contact and is rated for 17 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is...

ZB12-16

Eaton/Moeller ZB12-16 thermal overload relay that is adjustable from 12 to 16 AMPS and mounts to any DILM7, DILM9 or DILM12 3-pole contactor. This 3 phase overload relay comes with manual and...

M22-D-S

Moeller M22-D-S black momentary pushbutton with silver bezel and used in 22MM sized applications. This non-illuminated Moeller pushbutton is used with M22 contact blocks and a M22-A fixing adapter...

ZB32-2,4

Eaton/Moeller ZB32-2.4 thermal overload relay that is adjustable from 1.6 to 2.4 AMPS and mounts to any DILM17, DILM25, or DILM32 3-pole contactor. This 3 phase overload relay comes with manual and...

P1-32/EA/SVB

Eaton/Moeller P1-32/EA/SVB 32 AMP cover mounted disconnect switch with red and yellow padlock-able handle (for emergency stop applications). This 2 position on/off disconnect switch mounts to the...