Moeller Electric

DILM115 (240V AC)

Eaton/Moeller DILM115 contactor with a 240 volt AC coil and rated for 115 AMPS AC-3 (155 AMPS AC-1). This 3 pole IEC rated contactor is rated for 50 H.P. @ 230 volt, 100 H.P. @ 460 volt 3-phase and...

DILM32-XTED11-10(RAC130)

Eaton/Moeller DILM32-XTED11-10 (RAC130) electronic timing module that is rated for 100 to 130 volt AC or DC, has a timing range of 0.5 to 10 seconds, and mounts to the front of any DILM7 through...

DILM40 (120V AC)

Eaton/Moeller DILM40 contactor with a 120 volt AC rated coil and is rated for 40 AMPS AC-3 (55 AMPS AC-1). This 3 pole IEC rated contactor is rated for 15 H.P. @ 230 volt, 30 H.P. @ 460 volt 3-phase...

31DILE

Eaton/Moeller 31DILE front mounted auxiliary contact block with 3 normally open (N.O.) and 1 normally closed contacts (N.C.) and screw terminals.  This four pole auxiliary contact snaps on to...

DILM150-XHI11

Eaton / Moeller DILM150-XHI11 two-pole auxiliary contact block with 1 normally open and 1 normally closed contacts and screw terminals. This front mounted auxiliary snaps onto any Moeller DILM...

DILA-XHI20

Eaton / Moeller DILA-XHI20 two-pole auxiliary contact block with 2 normally open contacts and screw terminals. This front mounted auxiliary snaps onto any Moeller DILA 4 pole relay or DILM contactor...

DILEM-01-G (24V DC)

Eaton/Moeller DILEM-01-G (24VDC) 9 AMP 3 pole miniature contactor with 1 normally closed auxiliary contact and a 24 volt DC rated coil. This miniature 3 pole contactor is only 45MM wide, allowing for...

ZB12-2,4

Eaton/Moeller ZB12-2.4 thermal overload relay that is adjustable from 1.6 to 2.4 AMPS and mounts to any DILM7, DILM9 or DILM12 3-pole contactor. This 3 phase overload relay comes with manual and...

M22-A

FRONT MOUNTING ADAPTER FOR USE WITH ALL PUSHBUTTONS, INDICATOR LIGHTS, SELECTOR SWITCHES AND CONTACT BLOCKS Click here for a Adode PDF specification file Moeller’s RMQ-Titan pilot devices...

M22-DP-R

The Eaton/Moeller M22-DP-R is a red mushroom operator that fits into 22MM holes and has a momentary operation.  This Eaton pilot device comes with a M22-A mounting adapter and up to 6 contact...

DILM32-01 (24vAC)

Eaton/Moeller DILM32-01 contactor with a 24 volt AC rated coil, 1 normally closed base mounted auxiliary contact and is rated for 32 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is rated...

M22-LED230-G

Eaton/ Moeller M22-LED230-G Titan series front mounted LED elements for illuminated M22 push buttons and selector switches. Rated from 85-264vAC/DC, screw terminals and green color for use with blue...