Benshaw

RSC-75-6AC240

Benshaw RSC-75-6AC240 75 AMP 3 pole contactor with a 240 volt coil and two sets of side mounted auxiliary contacts, 2 normally open and 2 normally closed. This IEC contactor is rated for 25 H.P. @...

RC-50A

Benshaw RC-50A 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RSC-40-6AC120

Benshaw RSC-40-6AC120 40 AMP 3 pole contactor with a 120 volt coil and a set of side mounted auxiliary contacts, each with 1 normally open and 1 normally closed. This IEC contactor is rated for 10 H...

RSC-C40-6AC240

Benshaw RSC-C40-6AC240 replacement coil for RSC-9, RSC-12, RSC-18, RSC-22, RSC-32 and RSC-40 contactors and is rated for 240v60Hz. The coil is easily replaced with a flat head screw driver and can be...

RB2-1-S-240A-15C

Benshaw RB2-1-S-240A-15C open chassis soft starter rated at 240 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 100 H.P. @ 230 volt/200 H.P. @ 460...

RSC-C400-U120

Benshaw RSC-C400-U120 replacement coil for RSC-300 and RSC-400 contactors and is rated from 100 to 240 volt AC. This replacement coil easily withdraws from the contactor without the need for any...

RB2-1-S-838A-20C

Benshaw RB2-1-S-838A-20C open chassis soft starter rated at 838 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 350 H.P. @ 230 volt/700 H.P. @ 460...

RC-50A-56AC24

Benshaw RC-50A-56AC24 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and a 24 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O./1...

RSC-18-6AC240

Benshaw RSC-18-6AC240 18 AMP 3 pole contactor with a 240 volt coil and a set of base mounted auxiliary contacts, 1 normally open and 1 normally closed. This IEC contactor is rated for 5 H.P. @ 230...

RX2E-500-480-12KP

The Benshaw RX2E-500-480-12KP is a severe duty rated 590 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

RSI-001-S4-2W

The Benshaw RSI-001-S4-2W is a 1 horsepower at 230 volt variable frequency drive (VFD) that is rated for 4.2 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

SPO-85-15A

Benshaw SPO-85-15A Bimetallic Class 10 3 pole overload with a range from 12 to 18 AMPS and mounts directly to the RSC-50, RSC-65, RSC-75 and RSC-85 contactors in any coil voltage.  This 3 phase...