Benshaw

SPO-40-30A

Benshaw SPO-40-30A Bimetallic Class 10 3 pole overload with a range from 24 to 36 AMPS and mounts directly to the RSC-32 and RSC-40 contactors in any coil voltage.  This 3 phase thermal overload...

RB2-1-S-077A-13C

Benshaw RB2-1-S-077A-13C open chassis soft starter rated at 77 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 30 H.P. @ 230 volt/60 H.P. @ 460...

BIPC-300014-01

Benshaw BIPC-300014-01 Divider Card Assembly for replacement in Benshaw Medium Voltage Starters The MX2 control technology from Benshaw provides a powerful, flexible, intelligent low voltage motor...

RSC-300-U120

Benshaw RSC-300-U120 3 pole, 300 AMP AC-3 (350 AMP AC-1) contactor with a 100-240 volt AC rated coil and two side mounted auxiliary contacts, each with 1 normally open (N.O.) and 1 normally closed (N...

RC-12A

Benshaw RC-12A 3 pole, 12 AMP contactor that is rated 5 H.P. @ 230 volt, 7.5 H.P. @ 460 volt 3 Phase and has an AC coil (choose coil voltage below). Comes pre-installed with 1 side mounted auxiliary...

RMSP32HA25

Benshaw RMSP-32H-A25 motor starter protector with adjustable AMP range from 0.16 to 0.25 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

BIPC-300013-01

Benshaw BIPC-300013-01 4 Channel Micro Relay Card for replacement in Benshaw Medium Voltage Starters The MX2 control technology from Benshaw provides a powerful, flexible, intelligent low voltage...

RMSP32H22A

Benshaw RMSP-32H-22A motor starter protector with adjustable AMP range from 14 to 22 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

RC-40A-56AC120

Benshaw RC-40A-56AC120 3 pole, 40 AMP contactor that is rated 20 H.P. @ 230 volt, 30 H.P. @ 460 volt 3 Phase and a 120 volt AC coil (choose coil voltage below). Comes pre-installed with 2 side...

RSC-75-6AC120

Benshaw RSC-75-6AC120 75 AMP 3 pole contactor with a 120 volt coil and two sets of side mounted auxiliary contacts, 2 normally open and 2 normally closed. This IEC contactor is rated for 25 H.P. @...

RSC-22-6AC240

Benshaw RSC-22-6AC240 22 AMP 3 pole contactor with a 240 volt coil and a set of base mounted auxiliary contacts, 1 normally open and 1 normally closed. This IEC contactor is rated for 7.5 H.P. @ 230...

SPO-85-65A

Benshaw SPO-85-65A Bimetallic Class 10 3 pole overload with a range from 54 to 75 AMPS and mounts directly to the RSC-50, RSC-65, RSC-75 and RSC-85 contactors in any coil voltage.  This 3 phase...