Benshaw

RSI-003-S4-4W

The Benshaw RSI-003-S4-4W is a 3 horsepower at 460 volt variable frequency drive (VFD) that is rated for 4.8 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

SPO-22-11A

Benshaw SPO-22-11A Bimetallic Class 10 3 pole overload with a range from 9 to 13 AMPS and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3 phase...

MX2PB-300-4-4-CB-ST

Benshaw MX2PB Series 300 HP @ 480v Combination Circuit Breaker Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw...

RX2E-050-480-12KP

The Benshaw RX2E-050-480-12KP is a severe duty rated 65 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

SPO-220H-200A

Benshaw SPO-220H-200A Bimetallic Class 20 3 pole overload with a range from 160 to 240 AMPS and mounts directly to the RSC-180 and RSC-220 contactors in any coil voltage.  This 3 phase thermal...

RSI-001-S4-4W

The Benshaw RSI-001-S4-4W is a 1 horsepower at 460 volt variable frequency drive (VFD) that is rated for 2.1 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

RB2-1-S-361A-16C

Benshaw RB2-1-S-361A-16C open chassis soft starter rated at 361 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 150 H.P. @ 230 volt/300 H.P. @ 460...

MX2PB-200-4-4-CB-ST

Benshaw MX2PB Series 200 HP @ 480v Combination Circuit Breaker Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw...

CB-RCI-085-3R

Benshaw CB-RCI-085-3R Non-Combination 50 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...

RC-9A-56AC24

Benshaw RC-9A-56AC24 3 pole, 9 AMP contactor that is rated 3 H.P. @ 230 volt, 5 H.P. @ 460 volt 3 Phase and has a 24 volt AC coil. Comes pre-installed with 1 side mounted auxiliary contact (N.O./N.C...

SPO-40-15A

Benshaw SPO-40-15A Bimetallic Class 10 3 pole overload with a range from 12 to 18 AMPS and mounts directly to the RSC-32 and RSC-40 contactors in any coil voltage.  This 3 phase thermal overload...

BIPC-300042-02

Benshaw BIPC-300042-02 Micro 2 20 MHZ Communication Card for replacement in Benshaw Medium Voltage Starters The MX2 control technology from Benshaw provides a powerful, flexible, intelligent low...