Benshaw

RX2E-125-480-12KP

The Benshaw RX2E-125-480-12KP is a severe duty rated 156 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

MX2PB-100-4-4-CB-ST

Benshaw MX2PB Series 100 HP @ 480v Combination Circuit Breaker Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw...

RMSP-63H-63A

Benshaw RMSP-63H-63A motor starter protector with adjustable AMP range from 45 to 63 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

RC-100A-56AC240

Benshaw RC-100A-56AC240 3 pole, 100 AMP contactor that is rated 40 H.P. @ 230 volt, 75 H.P. @ 460 volt 3 Phase and an 240 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N...

RB2-1-S-077A-13C

Benshaw RB2-1-S-077A-13C open chassis soft starter rated at 77 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 30 H.P. @ 230 volt/60 H.P. @ 460...

RSC-300-U120

Benshaw RSC-300-U120 3 pole, 300 AMP AC-3 (350 AMP AC-1) contactor with a 100-240 volt AC rated coil and two side mounted auxiliary contacts, each with 1 normally open (N.O.) and 1 normally closed (N...

RC-12A

Benshaw RC-12A 3 pole, 12 AMP contactor that is rated 5 H.P. @ 230 volt, 7.5 H.P. @ 460 volt 3 Phase and has an AC coil (choose coil voltage below). Comes pre-installed with 1 side mounted auxiliary...

RMSP32HA25

Benshaw RMSP-32H-A25 motor starter protector with adjustable AMP range from 0.16 to 0.25 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

RMSP32H22A

Benshaw RMSP-32H-22A motor starter protector with adjustable AMP range from 14 to 22 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

RC-40A-56AC120

Benshaw RC-40A-56AC120 3 pole, 40 AMP contactor that is rated 20 H.P. @ 230 volt, 30 H.P. @ 460 volt 3 Phase and a 120 volt AC coil (choose coil voltage below). Comes pre-installed with 2 side...

RSC-22-6AC240

Benshaw RSC-22-6AC240 22 AMP 3 pole contactor with a 240 volt coil and a set of base mounted auxiliary contacts, 1 normally open and 1 normally closed. This IEC contactor is rated for 7.5 H.P. @ 230...

SPO-40-7A5

Benshaw SPO-40-7A5 Bimetallic Class 10 3 pole overload with a range from 6 to 9 AMPS and mounts directly to the RSC-32 and RSC-40 contactors in any coil voltage.  This 3 phase thermal overload...