Benshaw

RSC-T100

Benshaw RSC-T100 contact kit that includes 6 fixed and 3 moving contacts for replacement of all three poles in a RSC-100 contactor. To remove the existing contacts, the following steps must be taken:...

RSI-003-S4-2W

The Benshaw RSI-003-S4-2W is a 3 horsepower at 230 volt variable frequency drive (VFD) that is rated for 9.6 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

RSC-A4

BENSHAW AUXILIARY CONTACT - TOP MOUNT - 2 N.O. & 2 N.C - FOR CONTACTORS RSC9-RSC85 Click here to view a PDF file for the Benshaw series of auxiliary contacts Benshaw contactors are used for...

RX3E-250-480-12KP

The Benshaw RX3E-250-480-12KP is a severe duty rated 302 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

RC-22A-56AC24

Benshaw RC-22A-56AC24 3 pole, 22 AMP contactor that is rated 10 H.P. @ 230 volt, 15 H.P. @ 460 volt 3 Phase and has a 24 volt AC coil. Comes pre-installed with 1 side mounted auxiliary contact (N.O...

MX2PB-075-4-4-CB-ST

Benshaw MX2PB Series 75 HP @ 480v Combination Circuit Breaker Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw...

RX3E-150-480-12KP

The Benshaw RX3E-150-480-12KP is a severe duty rated 180 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

RSC-50-6AC24

Benshaw RSC-50-6AC24 50 AMP 3 pole contactor with a 24 volt coil and two sets of side mounted auxiliary contacts, 2 normally open and 2 normally closed. This IEC contactor is rated for 15 H.P. @ 230...

RX2E-400-480-12KP

The Benshaw RX2E-400-480-12KP is a severe duty rated 477 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

RX2E-100-480-12KP

The Benshaw RX2E-100-480-12KP is a severe duty rated 124 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

SPO-22-A82

Benshaw SPO-22-A82 Bimetallic Class 10 3 pole overload with a range from 0.63 to 1 AMP and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3 phase...

RMSP32H10A

Benshaw RMSP-32H-10A motor starter protector with adjustable AMP range from 6 to 10 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...