Benshaw

RSI-010-SG-4-B

The Benshaw RSI-010-SG-4B variable frequency drive (VFD) is rated for 10 horsepower at 460 volt 3 phase and is housed in a NEMA 1 enclosure.  The versatile power stack offers the user the...

SPO-85-8A5

Benshaw SPO-85-8A5 Bimetallic Class 10 3 pole overload with a range from 7 to 10 AMPS and mounts directly to the RSC-50, RSC-65, RSC-75 and RSC-85 contactors in any coil voltage.  This 3 phase...

RSI-500-SG-4

The Benshaw RSI-500-SG-4 variable frequency drive (VFD) is rated for 450 horsepower at 460 volt 3 phase and is housed in a protected chassis enclosure.  The versatile power stack offers the...

MX2PB-100-4-4-NC-ST

Benshaw MX2PB Series 100 HP @ 480v Non Combination Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw MX2PB...

RC-40A

Benshaw RC-40A 3 pole, 40 AMP contactor that is rated 20 H.P. @ 230 volt, 30 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RSC-32-6AC240

Benshaw RSC-32-6AC240 32 AMP 3 pole contactor with a 240 volt coil and a set of side mounted auxiliary contacts, each with 1 normally open and 1 normally closed. This IEC contactor is rated for 10 H...

RSC-150-U120

Benshaw RSC-150-U120 3 pole, 150 AMP AC-3 (210 AMP AC-1) contactor with a 100-240 volt AC rated coil and two side mounted auxiliary contacts, each with 1 normally open (N.O.) and 1 normally closed (N...

SPO-22-A14

Benshaw SPO-22-A14 Bimetallic Class 10 3 pole overload with a range from 0.10 to 0.16 AMPS and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3...

RC-50A-56AC120

Benshaw RC-50A-56AC120 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and a 120 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

RC-100A

Benshaw RC-100A 3 pole, 100 AMP contactor that is rated 40 H.P. @ 230 volt, 75 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RC-50A-56AC220

Benshaw RC-50A-56AC220 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and a 220 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

NC-RCI-032-3R

Benshaw NC-RCI-032-3R Non-Combination 10 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...