Benshaw

RC-40A

Benshaw RC-40A 3 pole, 40 AMP contactor that is rated 20 H.P. @ 230 volt, 30 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RSC-32-6AC240

Benshaw RSC-32-6AC240 32 AMP 3 pole contactor with a 240 volt coil and a set of side mounted auxiliary contacts, each with 1 normally open and 1 normally closed. This IEC contactor is rated for 10 H...

RSC-150-U120

Benshaw RSC-150-U120 3 pole, 150 AMP AC-3 (210 AMP AC-1) contactor with a 100-240 volt AC rated coil and two side mounted auxiliary contacts, each with 1 normally open (N.O.) and 1 normally closed (N...

SPO-22-A14

Benshaw SPO-22-A14 Bimetallic Class 10 3 pole overload with a range from 0.10 to 0.16 AMPS and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3...

RC-50A-56AC120

Benshaw RC-50A-56AC120 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and a 120 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

RC-100A

Benshaw RC-100A 3 pole, 100 AMP contactor that is rated 40 H.P. @ 230 volt, 75 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RC-50A-56AC220

Benshaw RC-50A-56AC220 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and a 220 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

NC-RCI-032-3R

Benshaw NC-RCI-032-3R Non-Combination 10 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...

RC-150A-56AC120

Benshaw RC-150A-56AC120 3 pole, 150 AMP contactor that is rated for 50 HP @ 230 volt, 100 HP @ 460 volt 3 phase and has a 120 volt AC rated coil. Comes with 2 sets of side mounted auxiliary contact...

RB2-1-S-027A-11C

Benshaw RB2-1-S-027A-11C open chassis soft starter rated at 27 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 10 H.P. @ 230 volt/20 H.P. @ 460...

RX2E-150-480-12KP

The Benshaw RX2E-150-480-12KP is a severe duty rated 180 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

MX2PB-400-4-4-CB-ST

Benshaw MX2PB Series 400 HP @ 480v Combination Circuit Breaker Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw...