Eaton, Cutler Hammer

XTCEXFBG40

EATON XTCEXFBG40 4 pole, top mounted auxiliary contact block with 4 N.O. contacts. For use on the EATON XTCE040D10 - XTCE150G contactors. Click here to view a PDF file of this EATON XTCEX Auxiliary...

C25FNF350

Eaton C25FNF350 definite purpose 3 pole contactor rated at 50 AMPS with an AC rated coil (must specify contactor coil voltage below). This 50 AMP contactor is a direct electrical replacement for the...

XTMC9A10B

Eaton XTMC9A10B 3 pole 9 AMP miniature contactor with 220v50Hz/240v60Hz AC coil and 1 normally open base mounted auxiliary contactor.  This IEC rated contactor comes with screw terminals and...

XTRM10A31

EATON XTRM10A31 4-pole control relay with 3 N.O. and 1 N.C. power poles and an AC rated coil (must choose coil voltage above). This Eaton 10 AMP relay comes with screw terminals, mounts on standard...

C25FNF350B

Eaton C25FNF350BA definite purpose 3 pole contactor rated at 50 AMPS with a 208-240v60Hz AC coil. This 50 AMP contactor is a direct electrical replacement for the Furnas 42DF35AG contactor (See here...

XTCE025C10A

Eaton XTCE025C10A 3 pole, 25 AMP AC-3 (40 AMP AC-1) contactor rated 10 H.P. @ 230v, 15 HP @ 460v 3-Phase with 1 normally open (N.O.) base mounted auxiliary contact and a 110v50Hz/120v60Hz AC coil...

XTOBP40BC1

Eaton XT0BP40BC1 thermal overload relay adjustable from 0.24 to 0.40 AMPS with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and phase loss protection. These thermal overloads offer Class...

XTOB016CC1

Eaton XT0B016CC1 thermal overload relay adjustable from 10 to 16 AMPS with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and phase loss protection. These thermal overloads offer Class 10...

XTOB001BC1

Eaton XT0B001BC1 thermal overload relay adjustable from 0.6 to 1 AMP with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and phase loss protection. These thermal overloads offer Class 10...

EATON M22-LED230-R

Eaton M22-LED230-R red LED light module rated for 85 to 264 volts AC and used with the M22 illuminated pilots devices, such as M22-DL and M22-DRL pushbuttons, M22-L pilot lights and M22-WL and...

XTCE080F00B

Eaton XTCE080F00B 3 pole, 80 AMP AC-3 (125 AMP AC-1) contactor rated 30 H.P. @ 230v, 60 HP @ 460v 3-Phase with a 220v50Hz/240v60Hz AC coil. Each contactor can have a front mounted two or four pole...

EATON M22-LED230-W

Eaton M22-LED230-W white LED light module rated for 85 to 264 volts AC and used with the M22 illuminated pilots devices, such as M22-DL and M22-DRL pushbuttons, M22-L pilot lights and M22-WL and...