Eaton, Cutler Hammer

EATON M22-D-R-GB0

Eaton M22-D-R-GB0 momentary pushbutton with a red "STOP" lens, silver bezel and is used in 22MM applications. Each pushbutton comes with a M22-A fixing adapter standard and up to 6 contact blocks can...

XTCEXFBG20

EATON XTCEXFBG20 2 pole, top mounted auxiliary contact block with 2 N.O. contacts. For use on the EATON XTCE040D10 - XTCE150G contactors. Click here to view a PDF file of this EATON XTCEX Auxiliary...

C320KG3

Eaton / Cutler Hammer C320KG3 Series A2 two pole side mounted auxiliary contact with 1 N.O. and 1 N.C. contact. Fits all C25D Definite Purpose contactors from 15 A up to 75A. Click here to view a...

XTOB040DC1

Eaton XTOB040DC1 thermal overload relay adjustable from 24 to 40 AMPS with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and a reset button. These thermal overloads are directly mounted to...

EATON M22-LED230-B

Eaton M22-LED230-B blue LED light module rated for 85 to 264 volts AC and used with the M22 illuminated pilots devices, such as M22-DL and M22-DRL pushbuttons, M22-L pilot lights and M22-WL and...

XTOM012AC1

EATON XTOM012AC1 thermal overload relay with an adjustable AMP range from 9 to 12 AMPS. For use with the 3 pole Eaton XTMC9A10 and XTMC9A01 miniature contactors. Each overload comes standard with an...

XTCE009B10T

Eaton XTCE009B10T 3 pole, 9 AMP AC-3 (20 AMP AC-1) contactor rated 3 H.P. @ 230v, 5 HP @ 460v 3-Phase with 1 normally open (N.O.) base mounted auxiliary contact and a 24v50/60Hz AC rated coil. Each...

C25FNF360

Eaton C25FNF360 definite purpose 3 pole contactor rated at 60 AMPS with an AC rated coil (must specify contactor coil voltage below). This 60 AMP contactor is a direct electrical replacement for the...

XTRE10B22TD

Eaton XTRE10B22TD four pole industrial control relay with 2 normally open (N.O.) and 2 normally closed (N.C.) poles and a 24 volt DC rated coil. This 10 AMP control relay has screw terminals, can be...

XTCE065D00T

Eaton XTCE065D00T 3 pole, 65 AMP AC-3 (88 AMP AC-1) contactor rated 25 H.P. @ 230v, 50 HP @ 460v 3-Phase with a 24v50/60Hz AC coil. Each contactor can have a front mounted two or four pole auxiliary...

XTCE050D

Eaton XTCE050D XT IEC Contactor — 50A, 3-Pole, D-Frame The Eaton XTCE050D is a 50A, 3-pole IEC contactor from Eaton’s XT series (also known as the Moeller DILM50). Rated at 40 HP at...

XTOB1P6BC1

Eaton XT0B1P6BC1 thermal overload relay adjustable from 1 to 1.6 AMPS with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and phase loss protection. These thermal overloads offer Class 10...