Benshaw

CB-RCI-085-3R

Benshaw CB-RCI-085-3R Non-Combination 50 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...

RC-9A-56AC24

Benshaw RC-9A-56AC24 3 pole, 9 AMP contactor that is rated 3 H.P. @ 230 volt, 5 H.P. @ 460 volt 3 Phase and has a 24 volt AC coil. Comes pre-installed with 1 side mounted auxiliary contact (N.O./N.C...

BIPC-300042-02

Benshaw BIPC-300042-02 Micro 2 20 MHZ Communication Card for replacement in Benshaw Medium Voltage Starters The MX2 control technology from Benshaw provides a powerful, flexible, intelligent low...

RB2-1-S-156A-14C

Benshaw RB2-1-S-156A-14C open chassis soft starter rated at 156 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 60 H.P. @ 230 volt/125 H.P. @ 460...

RSC-C800-U120

Benshaw RSC-C800-U120 replacement coil for RSC-600 and RSC-800 contactors and is rated from 100 to 127 volt AC. This replacement coil easily withdraws from the contactor without the need for any...

RSC-T220

Benshaw RSC-T220 contact kit that includes 6 fixed and 3 moving contacts for replacement of all three poles in a RSC-220 contactor. To remove the existing contacts, the following steps must be...

BIPC-300055-01

Benshaw BIPC-300055-01 Starter Card for MX2 Series Motor Control Maintain and upgrade your Benshaw MX2 Series motor control system with the BIPC-300055-01 Low Voltage Starter Card. Engineered for...

RSC-T300

Benshaw RSC-T300 contact kit that includes 6 fixed and 3 moving contacts for replacement of all three poles in a RSC-300 contactor. To remove the existing contacts, the following steps must be...

RX3E-100-480-12KP

The Benshaw RX3E-100-480-12KP is a severe duty rated 124 AMP soft starter housed in a NEMA 12 enclosure with a combination circuit breaker designed for full voltage emergency backup starting. ...

RC-50A

Benshaw RC-50A 3 pole, 50 AMP contactor that is rated 25 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RSC-40-6AC120

Benshaw RSC-40-6AC120 40 AMP 3 pole contactor with a 120 volt coil and a set of side mounted auxiliary contacts, each with 1 normally open and 1 normally closed. This IEC contactor is rated for 10 H...

RSC-C40-6AC240

Benshaw RSC-C40-6AC240 replacement coil for RSC-9, RSC-12, RSC-18, RSC-22, RSC-32 and RSC-40 contactors and is rated for 240v60Hz. The coil is easily replaced with a flat head screw driver and can be...