Benshaw

MX2PB-050-4-4-NC-ST

Benshaw MX2PB Series 50 HP @ 480v Non Combination Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw MX2PB Starter...

CB-RCI-018-3R

Benshaw CB-RCI-018-3R Non-Combination 5 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...

RSC-T400

Benshaw RSC-T400 contact kit that includes 6 fixed and 3 moving contacts for replacement of all three poles in a RSC-400 contactor. To remove the existing contacts, the following steps must be...

RC-32A-56AC240

Benshaw RC-32A-56AC240 3 pole, 32 AMP contactor that is rated 10 H.P. @ 230 volt, 20 H.P. @ 460 volt 3 Phase and a 240 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

SPO-40-3A3

Benshaw SPO-40-3A3 Bimetallic Class 10 3 pole overload with a range from 2.5 to 4 AMPS and mounts directly to the RSC-32 and RSC-40 contactors in any coil voltage.  This 3 phase thermal overload...

BIPC-300052-01

Benshaw BIPC-300052-01 RC Snubber CARD, .47UF, 33 OHM for high vibration environments for replacement in Benshaw Medium Voltage Starters The MX2 control technology from Benshaw provides a powerful,...

MX2PB-200-4-4-NC-ST

Benshaw MX2PB Series 200 HP @ 480v Non Combination Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw MX2PB Starter...

RSC-9M-6AC240

BENSHAW CONTACTOR - 9 AMPS - 240 VOLT AC COIL. THESE ARE ALSO AVAILABLE IN 24V AND 120V. PLEASE CALL 800.222.5129 TO CHECK AVAILABILITY. Benshaw RSC contactor highlights Benshaw contactors are used...

KPMX3LLCD

Benshaw KPMX3LLCD Large Keypad for Medium Voltage MX2/MX3 softstarters. With more built-in features, more configurable options, greater expandability and a broader communications capability than any...

RSI-007-S4-2W

The Benshaw RSI-007-S4-2W is a 7.5 horsepower at 230 volt variable frequency drive (VFD) that is rated for 22 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

RSC-12-6AC24

Benshaw RSC-12-6AC24 12 AMP 3 pole contactor with a 24 volt coil and a set of base mounted auxiliary contacts, 1 normally open and 1 normally closed. This IEC contactor is rated for 3 H.P. @ 230 volt...

SPO-22H-11A

Benshaw SPO-22H-11A Bimetallic Class 20 3 pole overload with a range from 9 to 13 AMPS and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3 phase...