Benshaw

SPO-150

Benshaw SPO-150 Bimetallic Class 10 3 pole overload with ranges from 45A-150A (Choose specific range below) and mounts directly to the RSC-150 contactors in any coil voltage.  These 3 phase...

BIPC-300030-14

Benshaw BIPC-300030-14 Micro 2 Power Card for replacement in Benshaw Medium Voltage Starters The MX2 control technology from Benshaw provides a powerful, flexible, intelligent low voltage motor...

SPO-40-19A

Benshaw SPO-40-19A Bimetallic Class 10 3 pole overload with a range from 16 to 22 AMPS and mounts directly to the RSC-32 and RSC-40 contactors in any coil voltage.  This 3 phase thermal overload...

RMSP32H2A5

Benshaw RMSP-32H-2A5 motor starter protector with adjustable AMP range from 1.6 to 2.5 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

RSC-600-U120

Benshaw RSC-600-U120 3 pole, 600 AMP AC-3 (660 AMP AC-1) contactor with a 100-127 volt AC rated coil and two side mounted auxiliary contacts, each with 1 normally open (N.O.) and 1 normally closed (N...

RC-32A-56AC24

Benshaw RC-32A-56AC24 3 pole, 32 AMP contactor that is rated 10 H.P. @ 230 volt, 20 H.P. @ 460 volt 3 Phase and a 24 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O./1...

RC-18A

Benshaw RC-18A 3 pole, 18 AMP contactor that is rated 7.5 H.P. @ 230 volt, 10 H.P. @ 460 volt 3 Phase and has an AC coil (choose coil voltage below). Comes pre-installed with 1 side mounted auxiliary...

RC-65A-56AC120

Benshaw RC-65A-56AC120 RediStart Contactor — 65A, 3-Pole, 120V AC Coil The Benshaw RC-65A-56AC120 is a 65A, 3-pole IEC contactor from the RediStart RC series with a 120V AC coil. Rated at...

RSC-40-6AC240

Benshaw RSC-40-6AC240 40 AMP 3 pole contactor with a 240 volt coil and a set of side mounted auxiliary contacts, each with 1 normally open and 1 normally closed. This IEC contactor is rated for 10 H...

RC-65A

Benshaw RC-65A 3 pole, 65 AMP contactor that is rated 30 H.P. @ 230 volt, 50 H.P. @ 460 volt 3 Phase and an AC coil (choose coil voltage below). Comes pre-installed with 2 side mounted auxiliary...

RMSP32H26A

Benshaw RMSP-32H-26A motor starter protector with adjustable AMP range from 18 to 26 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

SPO-22-6A5

Benshaw SPO-22-6A5 Bimetallic Class 10 3 pole overload with a range from 5 to 8 AMPS and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3 phase...