Benshaw

SPO-22-A33

Benshaw SPO-22-A33 Bimetallic Class 10 3 pole overload with a range from 0.25 to 0.40 AMPS and mounts directly to the RSC-9, RSC-12, RSC-18 and RSC-22 contactor in any coil voltage.  This 3...

RSC-9-6AC208

Benshaw RSC-9-6AC208 9 AMP 3 pole contactor with a 208 volt coil and a set of base mounted auxiliary contacts, 1 normally open and 1 normally closed. This IEC contactor is rated for 2 H.P. @ 230 volt...

RSC-22-6AC120

Benshaw RSC-22-6AC120 22 AMP 3 pole contactor with a 120 volt coil and a set of base mounted auxiliary contacts, 1 normally open and 1 normally closed. This IEC contactor is rated for 7.5 H.P. @ 230...

RSI-025-S4-4W

The Benshaw RSI-025-S4-4W is a 25 horsepower at 460 volt variable frequency drive (VFD) that is rated for 34 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

BIPC-400100-01

Benshaw BIPC-400100-01 MX3 Input/Output Card Set for Low Voltage Variations for replacement in Benshaw Low Voltage Starters The MX2 control technology from Benshaw provides a powerful, flexible,...

RC-85A-56AC240

Benshaw RC-85A-56AC240 3 pole, 85 AMP contactor that is rated 40 H.P. @ 230 volt, 60 H.P. @ 460 volt 3 Phase and a 240 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

RMSP32H13A

Benshaw RMSP-32H-13A motor starter protector with adjustable AMP range from 9 to 13 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

RSI-075-S4-4W

The Benshaw RSI-075-S4-4W is a 75 horsepower at 460 volt variable frequency drive (VFD) that is rated for 96 AMPS standard duty.  This wash down VFD is housed in a NEMA 4X polycarbonate...

RSC-32-6AC120

Benshaw RSC-32-6AC120 32 AMP 3 pole contactor with a 120 volt coil and a set of side mounted auxiliary contacts, each with 1 normally open and 1 normally closed. This IEC contactor is rated for 10 H...

RSC-220-U120

Benshaw RSC-220-U120 3 pole, 220 AMP AC-3 (275 AMP AC-1) contactor with a 100-240 volt AC rated coil and two side mounted auxiliary contacts, each with 1 normally open (N.O.) and 1 normally closed (N...

MX2PB-050-4-4-CB-ST

Benshaw MX2PB Series 50 HP @ 480v Combination Circuit Breaker Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw...

SPO-220H-130A

Benshaw SPO-220H-130A Bimetallic Class 20 3 pole overload with a range from 100 to 160 AMPS and mounts directly to the RSC-180 and RSC-220 contactors in any coil voltage.  This 3 phase thermal...