Eaton XTMC9A10TD 3 pole 9 AMP miniature contactor with 24 volt DC coil and 1 normally open base mounted auxiliary contactor. This IEC rated contactor comes with screw terminals and mounts on standard 35MM DIN rail (or can be screwed to the back of the panel) for easy installation. The XTMC9A10TD contactor is a suitable replacement for the Moeller DILEM-10-G with a 24 volt DC coil and additional accessories such as XTMCX top mounted auxiliary contacts and XTOM thermal overload relays can be added for full motor protection and signalling.
|24 volt DC
5 H.P. @ 460 volt
3 H.P. @ 230 volt
|Base mounted auxiliary
|1 normally open
Eaton’s new line of XTMC9A miniature controls includes non-reversing and reversing mini contactors, mini overload relays and snap-on accessories. A wide range of applications is possible, including small electrical motors from fractional to 5 hp (460 Vac) or up to 4 kW (400 Vac).
Due to its compact size, the XTMC9A line of mini controls is best suited to be applied in light-duty loads, such as hoisting, packaging, material handling, heating, lighting and automation systems. XTMC9A mini contactors are a particularly compact, economic and environmentally friendly solution wherever control of small motors or loads is required.
Mini Contactors—Types XTMC and XTMF, 6–9A
- AC control from 12V to 550V 50 Hz, 600V 60 Hz
- DC control from 12V to 220V
- Reversing or non-reversing
- Three- and four-pole configurations
- Three-pole XTMC
- Four-pole XTMF
- Panel or DIN rail mounting
- IP20 finger and back-of hand proof
- Low noise operation
- High degree of climatic proofing
- Large ambient temperature range –25° to 50°C [–13° to 122°F]