3 pole Manual Motor Starters

KTA7-45H

Sprecher and Schuh KTA7-45H motor circuit controller with adjustable AMP ranges from 6.3 to 45 AMPS (must choose specific AMP range above) - Each manual motor protector has current limiting short...

RMSP32H8A

Benshaw RMSP-32H-8A motor starter protector with adjustable AMP range from 5 to 8 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

140M-C2E-B16

Allen Bradley 140M-C2E-B16 Series C motor protection circuit breaker with trip class 10 (trips in 10 seconds of less), DIN rail mounting, rotary operation and adjusts from 1 to 1.6 AMPS. Each motor...

140M-C2E-C32

Allen Bradley 140M-C2E-C32 Series C motor protection circuit breaker with trip class 10 (trips in 10 seconds of less), DIN rail mounting, rotary operation and adjusts from 27 to 32 AMPS. Each motor...

3RV2011-0KA10

Siemens 3RV2011-0KA10 motor starter protector with an adjustable AMP range from 0.90 to 1.25 AMPS, a rotary ON/OFF handle and class 10 overload trip characteristics (trips in 10 seconds or less)...

MMS-32H-10A

LS MMS-32H-10A manual motor starter with rotary on/off handle and is adjustable from 6 to 10 AMPS. This motor protector has Class 10 tripping (trips in less than 10 seconds), phase loss protection...

PKE12-XTU-12

Moeller Electric/Eaton PKE12-XTU-12 starter with electronic trip module AMP range from 3 to 12 AMPS, Selectable Class 5 through 10 and rotary on/off handle . Tool-less installation of electronic trip...

RMSP32H4A

Benshaw RMSP-32H-4A motor starter protector with adjustable AMP range from 2.5 to 4 AMPS, Class 10 protection and phase loss sensitivity. These manual motor starters are suitable for up to 690V...

3RV2011-1GA10

Siemens 3RV2011-1GA10 motor starter protector with an adjustable AMP range from 4.5 to 6.3 AMPS, a rotary ON/OFF handle and class 10 overload trip characteristics (trips in 10 seconds or less). This...

3RV2011-1KA10

Siemens 3RV2011-1KA10 motor starter protector with an adjustable AMP range from 9 to 12.5 AMPS, a rotary ON/OFF handle and class 10 overload trip characteristics (trips in 10 seconds or less). This...

GV2ME08

Schneider Electric / Telemecanique GV2ME08 manual starter and protector with ON/OFF push button design and an adjustable thermal trip setting from 2.5A-4A.  The GV2 motor protectors are a manual...

KTA7-25S-2.5A

Sprecher and Schuh KTA7-25S-2.5A Motor Circuit Controller with adjustable AMP ranges from 1.6 to 2.5 AMPS - Each manual motor protector has Current limiting short circuit protection, Screw terminals,...