Product Description
Schneider Electric LC2D12J7 12 AMP reversing contactor that is electrically and mechanically interlocked and has a 12v50/60Hz AC coil. This IEC reversing contactor is rated for 3 H.P. @ 230 volt, 7.5 H.P. @ 460 volt 3 Phase, has a total of 2 normally open (N.O.) and 2 normally closed (N.C.) base mounted auxiliary contacts and can be mounted on standard 35MM Din rail. The LC2D12J7 contactor is comprised of two LC1D12J7 contactors connected together with a LAD9R1V reversing kit, which includes both the mechanical interlock and line and load side wiring harnesses. Additional LADN auxiliaries and LRD overloads can be added for signalling and motor protection.
| AMP Rating | 12 AMP AC-3, 25 AMPS AC-1 |
| Horsepower |
7.5 H.P. @ 460 volt 3 H.P. @ 230 volt |
| Coil Voltage | 12 volt AC |
| Auxiliary Contacts | 2 N.O. + 2 N.C. |
| Terminals | Screw |
Each Telemecanique LC2D contactor is fitted with a cover, preventing manual movement of contacts. Clear identification and separated control and power circuits reduce wiring errors. Each TeSys D-Line contactor has two standard, built-in auxiliary contacts (1 NO and 1 NC;isolated), simplifying selection and reducing inventory maintenance. Front- and side mounted auxiliary contact blocks allow for extended logic control operations.
- High-performance power contacts and protection components guarantee safe operation.
- IP 2 finger-safe terminals.
- Easy, risk-free connection with a color-coded system and wiring diagrams.
- A cover supplied with the contactor prevents manual movement of the contacts.
- Increased insulation distances between control and power for full compatibility with installations requiring very low control voltages.
- Motor starters can be upgraded easily:
– Solid connections between accessories and associated devices ensure a secure fit.
– The snap-on mounting system allows the replacement of a starter without interference to adjoining lines.
