Moeller Electric

PKE12

Moeller Electric/Eaton PKE12 starter (base only, trip module required for this item to operate) for AMP ranges from 0.3 AMPS up to 12 AMPS. Tool-less installation of electronic trip module and snaps...

DILM1000-XHI11-SA

Eaton / Moeller DILM1000-XHI11-SA two-pole auxiliary contact block with 1 normally open and 1 normally closed contacts and screw terminals. This side mounted auxiliary snaps onto any Moeller...

M22-DL-G

Moeller M22-DL-G green momentary pushbutton with silver bezel and used in 22MM sized applications. This illuminated Moeller pushbutton is used with M22 contact blocks and a M22-A fixing adapter for...

ZB150-50

Eaton/Moeller ZB150-50 thermal overload relay that is adjustable from 35 to 50 AMPS and mounts to any DILM80, DILM95, DILM115 or DILM150 3-pole contactor. This 3 phase overload relay comes with...

HI11-P1/P3E

Disconnect Switch Auxiliary ContactAUXILIARY CONTACT WITH 1 N.O. AND 1 N.C. CONTACT. CAN BE MOUNTED ON LEFT OR RIGHT OF SWITCH BASE. FOR USE WITH P1-25/EA/SVB, P1-32/EA/SVB, P3-63/EA/SVB AND...

DILM80 (RDC24)

Eaton/Moeller DILM80 contactor with a 24 volt DC rated coil and is rated for 80 AMPS AC-3 (125 AMPS AC-1). This 3 pole IEC rated contactor is rated for 30 H.P. @ 230 volt, 60 H.P. @ 460 volt 3-phase...

LS-XLA

The Eaton LS-XLA limit switch actuator with angled roller lever that can be installed on all LS limit switch bodies regardless of the contact arrangement. This roller lever head can be attached in...

M22-DRP-R

The Eaton/Moeller M22-DRP-R is a red mushroom operator that fits into 22MM holes and has a maintained operation.  This Eaton pilot device comes with a M22-A mounting adapter and up to 6 contact...

PKZMO-20

Eaton / Moeller PKZM0-20 manual motor protector that is adjustable from 16 to 20 AMPS, has Class 10 tripping characteristic (trips in 10 seconds or less), a rotary operated on/off handle and screw...

ZM-1-PKZ2

Moeller ZM-1-PKZ2 thermal trip module that is adjustable from 0.6 to 1 AMP and is used for installation into the PKZ2 base module. This trip block comes standard with Class 10 tripping so that it...

DILM32-XTED11-100(RAC240)

Eaton/Moeller DILM32-XTED11-100 (RAC240) electronic timing module that is rated for 200 to 240 volt AC, has a timing range of 5 to 100 seconds, and mounts to the front of any DILM7 through DILM32...

M22-LEDC230-R

Eaton/ Moeller M22-LEDC230-R Titan series rear mounted LED elements for illuminated M22 push buttons and selector switches that are housed in IP65 enclosures. Rated from 85-264vAC/DC, screw terminals...