Eaton, Cutler Hammer

XTCE150G00T

Eaton XTCE150G00T 3 pole, 150 AMP AC-3 (180 AMP AC-1) contactor rated 60 H.P. @ 230v, 125 HP @ 460v 3-Phase with a 24v50/60Hz AC coil. Each contactor can have a front mounted two or four pole...

XTRE10B31

Eaton XTRE10B31 four pole industrial control relay with 3 normally open (N.O.) and 1 normally closed (N.C.) poles and an AC or DC rated coil (must choose specific coil voltage above). This 10 AMP...

XTOB006CC1

Eaton XT0B006CC1 thermal overload relay adjustable from 4 to 6 AMPS with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and phase loss protection. These thermal overloads offer Class 10...

XTOB024DC1

Eaton XTOB024DC1 thermal overload relay adjustable from 16 to 24 AMPS with 1 N.O and 1 N.C. auxiliaries, manual and automatic reset and a reset button. These thermal overloads are directly mounted to...

EATON M22-LED-G

Eaton M22-LED-G green LED light module rated for 12 to 30 volts AC/DC and used with the M22 illuminated pilots devices, such as M22-DL and M22-DRL pushbuttons, M22-L pilot lights and M22-WL and...

C25FNF375B

Eaton C25FNF375B definite purpose 3 pole contactor rated at 75 AMPS with a 208-240v60Hz AC coil. This 75 AMP contactor is a direct electrical replacement for the Furnas 42EF35AG contactor (See here...

XTCE007B10

Eaton XTCE007B10 3 pole, 7 AMP AC-3 (20 AMP AC-1) contactor rated 2 H.P. @ 230v, 3 HP @ 460v 3-Phase with 1 normally open (N.O.) base mounted auxiliary contact and an AC or DC rated coil (must choose...

EATON M22-DL-W

Eaton M22-DL-W momentary illumintated pushbutton with a white lens, silver bezel and is used in 22MM applications. Each pushbutton comes with a M22-A fixing adapter standard and up to 5 contact...

XTSC1P6BB

Eaton XTSC1P6BB combination motor starter/controller that is adjustable from 1.0 to 1.6 AMPS and has an AC rated coil (must specify coil voltage above). This combo starter is comprised of a...

XTCEXFAC02

Eaton XTCEXFAC02 two-pole auxiliary contact block with 2 normally closed contacts and screw terminals. This front mounted auxiliary snaps onto any Eaton XTRE 4 pole relay or XTCE contactors up...

XTOM2P4AC1

EATON XTOM2P4AC1 thermal overload relay with an adjustable AMP range from 1.6 to 2.4 AMPS. For use with the 3 pole Eaton XTMC9A10 and XTMC9A01 miniature contactors. Each overload comes standard with...

C25END425T

Eaton / Cutler Hammer C25END425T definite purpose 4 pole contactor rated at 25 AMPS with a 24 volt AC coil. This definite purpose contactor has double quick connect terminals, metal base plate and is...