Benshaw

MX2PB-400-4-4-NC-ST

Benshaw MX2PB Series 400 HP @ 480v Non Combination Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw MX2PB...

RB2-1-S-125A-14C

Benshaw RB2-1-S-125A-14C open chassis soft starter rated at 125 AMPS with an integral bypass and MX2 technology. This low voltage Benshaw soft starter is rated for 50 H.P. @ 230 volt/100 H.P. @ 460...

NC-RCI-085-3R

Benshaw NC-RCI-085-3R Non-Combination 50 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...

RC-32A-56AC120

Benshaw RC-32A-56AC120 3 pole, 32 AMP contactor that is rated 10 H.P. @ 230 volt, 20 H.P. @ 460 volt 3 Phase and a 120 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O...

CB-RCI-150-3R

Benshaw CB-RCI-150-3R Non-Combination 100 H.P. @ 480v Starter with solid state overload in a NEMA 12/3R Click here to view a PDF file of this Benshaw RCI starter RCI starters are NEMA Rated, cUL...

RSC-T125

Benshaw RSC-T125 contact kit that includes 6 fixed and 3 moving contacts for replacement of all three poles in a RSC-125 contactor. To remove the existing contacts, the following steps must be taken:...

RC-12A-56AC24

Benshaw RC-12A-56AC24 3 pole, 12 AMP contactor that is rated 5 H.P. @ 230 volt, 7.5 H.P. @ 460 volt 3 Phase and has a 24 volt AC coil. Comes pre-installed with 1 side mounted auxiliary contact (N.O...

RSI-020-SG-2-B

The Benshaw RSI-020-SG-2B variable frequency drive (VFD) is rated for 20 horsepower at 230 volt 3 phase and is housed in a NEMA 1 enclosure.  The versatile power stack offers the user the...

MX2PB-300-4-4-NC-ST

Benshaw MX2PB Series 300 HP @ 480v Non Combination Starter with Integral Bypass in a NEMA 4/12 Enclosure. Comes standard with no options. Click here to view a PDF file on this Benshaw MX2PB...

RC-65A-56AC24

Benshaw RC-65A-56AC24 3 pole, 65 AMP contactor that is rated 30 H.P. @ 230 volt, 50 H.P. @ 460 volt 3 Phase and a 24 volt AC coil. Comes pre-installed with 2 side mounted auxiliary contacts (1 N.O./1...

SPO-40-11A

Benshaw SPO-40-11A Bimetallic Class 10 3 pole overload with a range from 9 to 13 AMPS and mounts directly to the RSC-32 and RSC-40 contactors in any coil voltage.  This 3 phase thermal overload...

RSC-85-6AC240

Benshaw RSC-85-6AC240 85 AMP 3 pole contactor with a 240 volt coil and two sets of side mounted auxiliary contacts, 2 normally open and 2 normally closed. This IEC contactor is rated for 30 H.P. @...