Moeller Electric

DILER-40 (240vAC)

Eaton / Moeller DILER-40 (220v50Hz/240v60Hz) 4 pole miniature control relay with 4 normally open power poles and a 220/240 volt AC rated coil. Each relay in this series comes with screw terminals,...

P3-63/EA/SVB-SW

Eaton/Moeller P3-63/EA/SVB-SW 63 AMP cover mounted disconnect switch with black handle. This 2 position on/off disconnect switch mounts to the back of the panel door with rear-facing screw terminals...

DILM9-01

Eaton/Moeller DILM9-01 contactor with an AC rated coil (must choose coil voltage), 1 normally closed base mounted auxiliary contact and is rated for 9 AMPS AC-3 (20 AMPS AC-1). This 3 pole IEC rated...

NZMB1-A40-NA

Eaton/Moeller NZMB1-A40-NA 3-pole circuit breaker with basic switching capacity and a thermo-magnetic release. This 40 AMP molded case circuit breaker has a 320A-400A short-circuit release and an...

NZMB2-A100-BT-NA

Eaton/Moeller NZMB2-A100-BT-NA 3-pole circuit breaker with basic switching capacity and a thermo-magnetic release. This 100 AMP molded case circuit breaker has a 600A-1000A short-circuit release and...

DILM17-10

Eaton/Moeller DILM17-10 contactor with an AC rated coil (must choose coil voltage), 1 normally open base mounted auxiliary contact and is rated for 17 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated...

DILM17-10 (240V AC)

Eaton/Moeller DILM17-10 contactor with a 240 volt AC rated coil, 1 normally open base mounted auxiliary contact and is rated for 17 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is rated...

DILM115 (120V AC)

Eaton/Moeller DILM115 contactor with a 120 volt AC coil and rated for 115 AMPS AC-3 (155 AMPS AC-1). This 3 pole IEC rated contactor is rated for 50 H.P. @ 230 volt, 100 H.P. @ 460 volt 3-phase and...

DILM65-XSP (240vAC)

Moeller Electric/Klockner Moeller DILM65-XSP 240 volt AC replacement coil for DILM40, DILM50 and DILM65 contactors. Moeller’s DILM contactor series includes a completely NEW offering in the...

DILA-40 (120V AC)

Eaton/Moeller DILA-40 (110v50Hz/120v60Hz) 4-pole control relay with 4 normally open (N.O.) power poles and a 120 volt AC rated coil. This 10 AMP control relay has screw terminals, can be mounted on...

NHI11-PKZ0

Eaton / Moeller NHI11-PKZ0 two pole side mounted auxiliary contact for PKZM0 and PKZM4 manual motor protectors.  Comes with 1 normally open and 1 normally closed auxiliary, screw terminals and...

ZB12-0,16

Eaton/Moeller ZB12-0.16 thermal overload relay that is adjustable from 0.10 to 0.16 AMPS and mounts to any DILM7, DILM9 or DILM12 3-pole contactor. This 3 phase overload relay comes with manual and...