Product Description
Lovato BF1210A22060 3-pole 12 AMP AC-3 (28 AMP AC-1) contactor with a 220v60Hz AC coil. Rated for 5 H.P. at 230 volt and 7.5 H.P. at 460 volt, this IEC contactor comes with 1 normally open (N.O.) base mounted auxiliary contact, screw terminals and can be either screwed to a back plate or mounted on standard 35MM DIN rail. Accessories that are available for the BF1210A22060 include front and size mounted auxiliary contacts (up to 4 additional poles) and load side direct mount overload relays.
| AMP Rating |
12 AMP AC-3 28 AMP AC-1 |
| Coil Voltage | 220 volt AC |
| Horsepower |
5 H.P. @ 230 volt 7.5 H.P. @ 460 volt |
| Auxiliary Contact | Normally Open (N.O.) |
| Terminals | Screw |
Click here for a catalog page on this Lovato Contactor
Four-terminal coil
Connecting cables can be coupled to the coil, both on the line and load ends of the contactor.
Side add-on fourth pole
For the 45A and 56A AC1 ratings, a side-mount fourth power pole can be snapped on the three-pole contactor.This solution consents to optimise inventory control.
Mechanical interlock
Size 1 contactors, 9 to 25A in AC3, can be possibly mechanically and electrically interlocked with size 2 contactors, 26 to 38A in AC3.The new BFX50 02 mechanical interlock comprises two built-in auxiliary NC contacts to make the electrical interlock as well.
35mm DIN rail mounting and fixing
Contactor mounting and demounting on a 35mm DIN rail are tool-less operations and are done by simply applying pressure on the contactor.Starter assembly
The assembly and ectromechanical starters is extremely fast and reliable. Versatile electrical and mechanical connecting systems consent to make compact starters, in no time at all and without committing errors.
Effortless thermal overload relay link
During the connection of the thermal overload relay to the contactor, its auxiliary contact is simultaneously linked to the contactor coil terminal, by rigid connector.The complete overload relay fixing is obtained with one single operation and without other connections.
Terminal adaptability
Terminals are suitable for every type of cable: flexible, rigid, according to AWG standards and with any type of cable terminal.Power pole, auxiliary and coil screws can be tightened using one single type of screwdriver.
Snap-on installation
Mounting and demounting of the add-on auxiliary contacts and accessories, along with contactor coil replacement, are quick and easy operations and done with no tools.
