XTCERENCOILCD

Product Description

Eaton XTCERENCOILCD replacement coil rated at 600v60Hz for 3 pole XTCE018C01, XTCE018C10, XTCE025C01, XTCE025C10, XTCE032C01 and XTCE032C10 contactors. This coil comes with two plastic barriers to connect the coil feeders to the top unit of the contactor and can be easily replaced. Replacing the XTCERENCOILCD is simply done by using a flat head screwdriver to release the tabs on the line and load side of the contactor which releases the top of the contactor from the bottom. The next step is to remove the coil and armature by lightly pulling on each side of the coil to release the plastic tabs which are anchored into the side walls of the bottom portion of the contactor. Once these tabs are released, pull the coil and armature out of the base of the contactor, replace with the new coil and reinsert both pieces into the base. You should hear a loud click as the tabs are fastened back into the base. Finally reattached the top portion of the contactor to the base ensuring that the springs coming off the coil are correctly aligned with the cross-type pieces on the underside of the top piece.

Click here for a PDF file on this Eaton XTCEREN replacement coil