Limit Switches

LS-S11

Eaton/Moeller LS-S11 limit switch with screw terminals, 1 normally open and 1 normally closed contacts and a standard plunger actuator. Optional operating heads, such as a roller levers and actuating rods, can be added to the top of the LS-S11 limit...

LS-S11S

Eaton/Moeller LS-S11S limit switch with screw terminals, 1 normally open and 1 normally closed snap-action contacts and a standard plunger actuator. Optional operating heads, such as a roller levers and actuating rods, can be added to the top of the...

LS-XL

The Eaton LS-XL limit switch Eaton LS series limit switch actuator with long roller lever that can be installed on all LS limit switch bodies regardless of the contact arrangement. This roller lever head can be attached in all 4 directions, in 90 degree...

LS-XRLA

The Eaton LS-XRLA limit switch actuator with an adjustable roller lever with a 18 MM diameter that can be installed on all LS limit switch bodies regardless of the contact arrangement. This roller lever head can be attached in all 4 directions, in 90...

LS-S11DA

Eaton/Moeller LS-LS-S11DA limit switch with screw terminals, 1 early make and 1 late break contact set and a standard plunger actuator. Optional operating heads, such as a roller levers and actuating rods, can be added to the top of the LS-S11DA limit...

LS-S11D

Eaton/Moeller LS-S11D limit switch with screw terminals, 1 early make and 1 late break contact set and a standard plunger actuator. Optional operating heads, such as a roller levers and actuating rods, can be added to the top of the LS-S11D limit switch...

LS-S20

Eaton/Moeller LS-S20 limit switch with screw terminals, 2 normally open contacts and a standard plunger actuator. Optional operating heads, such as a roller levers and actuating rods, can be added to the top of the LS-S20 limit switch in any one of four...

KCA1S11N

Lovato KCA1S11N Limit Switch, Plastic K Series with two side 1/2" NPT entries and 1 N.O. and 1 N.C. Snap Action contactsClick here to view a PDF file spec sheet on this Lovato K series limit switchThe Lovato Electric K Series of Limit Switches have been...

KBA1A11N

Lovato KBA1A11N Limit Switch, Plastic K Series with one bottom 1/2" NPT entry and 1 N.O. and 1 N.C. Slow Break Make Before Break contactsClick here to view a PDF file spec sheet on this Lovato K series limit switchThe Lovato Electric K Series of Limit...

KBA1L11N

Lovato KBA1L11N Limit Switch, Plastic K Series with one bottom 1/2" NPT entry and 1 N.O. and 1 N.C. Slow Break contactsClick here to view a PDF file spec sheet on this Lovato K series limit switchThe Lovato Electric K Series of Limit Switches have been...

LS-S02

Eaton/Moeller LS-S02 limit switch with screw terminals, 2 normally closed contacts and a standard plunger actuator. Optional operating heads, such as a roller levers and actuating rods, can be added to the top of the LS-S02 limit switch in any one of...

LS-XLA

The Eaton LS-XLA limit switch actuator with angled roller lever that can be installed on all LS limit switch bodies regardless of the contact arrangement. This roller lever head can be attached in all 4 directions, in 90 degree increments, and can be...