Product Description
Schneider Electric LC1D95R7 contactor rated at 95 AMPS AC-3 (125 AMPS AC-1) with a 440v50/60Hz AC coil and 1 normally open (N.O.) and 1 normally closed (N.C.) base mounted auxiliary contacts. This 3 pole IEC rated contactor has screw terminals, can be mounted on standard 35MM Din rail or base mounted, and has coil connections on both the top and bottom of the contactor. Top and side mounted 2 and four pole auxiliaries can be added to the LC1D95R7 contactor along with load side direct mount thermal overload relays for complete motor protection.
| AMP Rating |
95 AMPS AC-3 125 AMPS AC-1 |
| Coil Voltage | 440 volt AC |
| Horsepower |
60 H.P. @ 460 volt 30 H.P. @ 230 volt |
| Number of Poles | 3 |
| Auxiliaries | 1 N.O. / 1 N.C. |
Features and Benefits
D-line contactors and overload relays are available in 11 contactor ratings for the USA market for inductive motor applications from 9A up to 150 full-load amps and resistive loads up to 200 A. Designed to control and provide overload protection to motors rated up to 100 HP at 480 Vac or 125 HP at 600 Vac, TeSys D meets your needs for a majority of motor starter applications. Read about TeSys D and Type 2 Coordinated Protection. 3-pole and 4-pole contactor versions available.
All contactors include built-in auxiliary contacts. All screw connections have IP20 finger-safe terminals with both North American and International terminal markings D-line contactors can be panel mounted with screws or DIN rail mounted
Easily Installed Accessories
- Auxiliary contact blocks with serrated wiping action
- Front mount dust tight auxiliary contact blocks
- Pneumatic time delay blocks
- Transient voltage surge suppressors
- Interface modules and electronic timers
- Mechanical latching blocks
- Control Circuit Flexibility
