Moeller Electric

M22-DR-W

Moeller M22-DR-W 22MM maintained (push to test) push button with white lens and silver bezel. This non-illuminated Moeller pilot device comes with a screw locking ring and a M22-A mounting adapter...

NZMN1-A100-NA

Eaton/Moeller NZMN1-A100-NA 3-pole circuit breaker with normal switching capacity and a thermo-magnetic release. This 100 AMP molded case circuit breaker has a 600A-1000A short-circuit release and an...

DILM17-01 (RDC24)

Eaton/Moeller DILM17-01 contactor with a 24 volt DC rated coil, 1 normally closed base mounted auxiliary contact and is rated for 17 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is rated...

DILM12-01 (24v50/60Hz)

Eaton/Moeller DILM12-01 contactor with a 24 volt AC coil, 1 normally closed base mounted auxiliary contact and is rated for 12 AMPS AC-3 (20 AMPS AC-1). This 3 pole IEC rated contactor is rated for 3...

20DILE

Eaton/Moeller 20DILE front mounted auxiliary contact block with 2 normally open contacts (N.O.) and screw terminals.  This two pole auxiliary contact snaps on to the front of any DILEM miniature...

M22-LEDC230-G

Eaton/ Moeller M22-LEDC230-G Titan series rear mounted LED elements for illuminated M22 push buttons and selector switches that are housed in IP65 enclosures. Rated from 85-264vAC/DC, screw terminals...

DILM32-10

Eaton/Moeller DILM32-10 contactor with an AC rated coil (must choose coil voltage), 1 normally closed base mounted auxiliary contact and is rated for 32 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC...

NZMB2-A40-BT-NA

Eaton/Moeller NZMB2-A40-BT-NA 3-pole circuit breaker with basic switching capacity and a thermo-magnetic release. This 40 AMP molded case circuit breaker has a 320A-400A short-circuit release and an...

G-DILOOM (24V DC)

Replacement DC Coil for Moeller DILOOM-G, DILOOM-10-G, DILOOM-01-G, DILOOAM-G, DILOOAM-10-G, DILOOAM-01-G and DILR-G contactors.

ZM-4-PKZ2

Moeller ZM-4-PKZ2 thermal trip module that is adjustable from 2.4 to 4 AMPS and is used for installation into the PKZ2 base module. This trip block comes standard with Class 10 tripping so that it...

M22-WLK3-R

Moeller M22-WLK3-R red momentary three position selectror switch with silver bezel and used in 22MM sized applications. This illuminated Moeller selector switch is used with M22 contact blocks...

ZM-1,6-PKZ2

Moeller ZM-1.6-PKZ2 thermal trip module that is adjustable from 1 to 1.6 AMPS and is used for installation into the PKZ2 base module. This trip block comes standard with Class 10 tripping so that it...