Moeller Electric

P1-25/V/SVB

Eaton/Moeller P1-25/V/SVB 25 AMP base mount disconnect switch with red and yellow padlock-able handle (for emergency stop applications). This 2 position on/off disconnect switch comes with DIN rail...

ZE-0,4

Eaton/Moeller ZE-0.4 thermal overload relay that is adjustable from 0.24 to 0.40 AMPS and mounts to any DILEM-10 or DILEM-01 3-pole contactor. This 3 phase overload relay comes with manual and...

DILM80 (24V AC)

Eaton/Moeller DILM80 contactor with a 24 volt AC rated coil and is rated for 80 AMPS AC-3 (125 AMPS AC-1). This 3 pole IEC rated contactor is rated for 30 H.P. @ 230 volt, 60 H.P. @ 460 volt 3-phase...

DILM17-10 (120V AC)

Eaton/Moeller DILM17-10 contactor with a 120 volt AC rated coil, 1 normally open base mounted auxiliary contact and is rated for 17 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is rated...

ZB12-0,4

Eaton/Moeller ZB12-0.4 thermal overload relay that is adjustable from 0.24 to 0.40 AMPS and mounts to any DILM7, DILM9 or DILM12 3-pole contactor. This 3 phase overload relay comes with manual and...

DILM25-10 (RDC24)

Eaton/Moeller DILM25-10 contactor with 24 volt DC rated coil, 1 normally open base mounted auxiliary contact and is rated for 25 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is rated for...

DILM65-XSP (24vAC)

Moeller Electric/Klockner Moeller DILM65-XSP 24 volt AC replacement coil for DILM40, DILM50 and DILM65 contactors. Moeller’s DILM contactor series includes a completely NEW offering in the...

M22-WR

Eaton/Moeller M22-WR rotary 2 position maintained selector switch with silver bezel.  This 22MM switch can have up to 6 contact blocks added for signalling purposes that are attached via a M22-A...

ZB12-1

Eaton/Moeller ZB12-1 thermal overload relay that is adjustable from 0.60 to 1 AMP and mounts to any DILM7, DILM9 or DILM12 3-pole contactor. This 3 phase overload relay comes with manual and...

DILA-22

Eaton/Moeller DILA-22 4-pole control relay with 2 normally open (N.O.) and 2 normally closed (N.C.) power poles and an AC rated coil (must specify coil voltage above). This 10 AMP control relay has...

DILM32-01 (240vAC)

Eaton/Moeller DILM32-01 contactor with a 240 volt AC rated coil, 1 normally closed base mounted auxiliary contact and is rated for 32 AMPS AC-3 (40 AMPS AC-1). This 3 pole IEC rated contactor is...

DILM32-XTED11-100(RA24)

Eaton/Moeller DILM32-XTED11-100 (RA24) electronic timing module that is rated for 24 volt AC or DC, has a timing range of 5 to 100 seconds, and mounts to the front of any DILM7 through DILM32 three...